Cyclone type for the boiler
Centrometal d.o.o. shall not be responsible for possible incorrect data caused by error made
in transcription and all figures and diagrams are for explanatory purposes only and relevant
adjustment have to be made at the spot. In any case, it reserves the right to modify its
products as deemed to be required and useful without any prior notification.
HEATING TECHNIQUE
CC 250 EKO-CKS 250
Total height of the Cyclone H
Total height of the Cyclone and the fan H1
Height flue gas exhaust H2
Boiler connection height H3
Total depth of the Cyclone L
Total width of the Cyclone L1
Flue gas exhaust diam. AxB
Cyclone diameter D
Cyclone mass
Fan mass
Fan power
Connection to the electric power net
mm
mm
mm
mm
mm
mm
Ø mm
Ø mm
kg
kg
W
V/Hz
1988
2440
1060
1705
612
498
160*160
426
88
35
550
400/50
The
Cyclone
CC
with
the
fan
and
the
boiler
controller
are
designed
to
be
connected
to
EKO-CKS
solid
fuel
firing
boilers
from
250
to
380
kW.
Their
function
is
to
drive
out
the
flue
gases
and
to
extract
dust
particles
from
the
flue
gases.
The
boiler
controller
regulates the boiler (and fan), protecting pump and heating pump.
By
installing
the
Cyclone
CC,
the
fan
and
the
boiler
controller,
the
required
height
of
the
chimney
can
be
reduced,
since
the
boiler
is
not
connected
directly
to
the
chimney.
The
Cyclone
and
fan
are
made
out
of
high
quality
materials
and
protected
by a suitable finish.
•
Designed
to
be
connected
to
EKO-CKS
solid
fuel
firing
boilers
from 250 to 380 kW.
•
The
Cyclone
is
designed
to
separate
and
collect
particles
from
the flue gases.
•
The
fan
is
used
to
drive
out
flue
gases
(fresh
air
is
pulled
into
the
combustion
chamber,
flue
gases
are
drawn
out
from
the
boiler
and
discharged
through
the
chimney
into
the
environment).
•
They
reduce
the
height
of
the
chimney
unlike
the
case
when
the
boiler is connected directly to the chimney
•
They
are
supplied
exclusively
for
boilers
EKO-CKS
250-380
kW
ready prepared for their connection
Technical specifications
Connection to the chimney
Connection to the fan
Connection to the boiler
Draining/cleaning damper
SUITABLE FOR THE ENVIRONMENT
Separate and collects flue gas
particles.
CHIMNEY
By installing the circles, the necessary chimney height is reduced, unlike the case when the boiler is connected directly to the chimney.INCREASE EFFICIENCY
By connecting the circles to the existing boiler, the efficiency of the boiler increases.HIGH QUALITY
They are made of high quality materials and are protected by primer.
1940
2515
2090
1705
718
607
202
526
114
44
1100
400/50
CC 300-380 EKO-CKS 300/380
PRODUCT CHARACTERISTICS:
Contact phone: +371 28818088, +371 29149923
E-mail: info@centrometal.lv
Homepage: www.centrometal.lv
Cyclone CC with the fan and controlle
Cyclone type for the boiler
CC 250 EKO-CKS 250
Total height of the Cyclone H
Total height of the Cyclone and the fan H1
Height flue gas exhaust H2
Boiler connection height H3
Total depth of the Cyclone L
Total width of the Cyclone L1
Flue gas exhaust diam. AxB
Cyclone diameter D
Cyclone mass
Fan mass
Fan power
Connection to the electric power net
mm
mm
mm
mm
mm
mm
Ø mm
Ø mm
kg
kg
W
V/Hz
1988
2440
1060
1705
612
498
160*160
426
88
35
550
400/50
The
Cyclone
CC
with
the
fan
and
the
boiler
controller
are
designed
to
be
connected
to
EKO-CKS
solid
fuel
firing
boilers
from
250
to
380
kW.
Their
function
is
to
drive
out
the
flue
gases
and
to
extract
dust
particles
from
the
flue
gases.
The
boiler
controller
regulates
the
boiler
(and
fan),
protecting
pump
and
heating pump.
By
installing
the
Cyclone
CC,
the
fan
and
the
boiler
controller,
the
required
height
of
the
chimney
can
be
reduced,
since
the
boiler
is
not
connected
directly
to
the
chimney.
The
Cyclone
and
fan
are
made
out
of
high
quality
materials
and
protected
by
a
suitable
finish.
•
Designed
to
be
connected
to
EKO-CKS
solid
fuel
firing
boilers from 250 to 380 kW.
•
The
Cyclone
is
designed
to
separate
and
collect
particles
from the flue gases.
•
The
fan
is
used
to
drive
out
flue
gases
(fresh
air
is
pulled
into
the
combustion
chamber,
flue
gases
are
drawn
out
from
the
boiler
and
discharged
through
the
chimney
into
the
environment).
•
They
reduce
the
height
of
the
chimney
unlike
the
case
when
the boiler is connected directly to the chimney
•
They
are
supplied
exclusively
for
boilers
EKO-CKS
250-380
kW ready prepared for their connection
Connection to the chimney
Connection to the fan
Connection to the boiler
Draining/cleaning damper
SUITABLE FOR THE ENVIRONMENT
Separate and collects flue gas particles.
CHIMNEY
By installing the circles, the necessary chimney
height is reduced, unlike the case when the boiler
is connected directly to the chimney.
INCREASE EFFICIENCY
By connecting the circles to the existing boiler, the
efficiency of the boiler increases.
HIGH QUALITY
They are made of high quality materials and are
protected by primer.
1940
2515
2090
1705
718
607
202
526
114
44
1100
400/50
CC 300-380 EKO-CKS 300/380
PRODUCT CHARACTERISTICS:
Contact phone: +371 28818088, +371 29149923
E-mail: info@centrometal.lv
HEATING TECHNIQUE
Cyclone CC with the fan and
controlle
Technical specifications:
Contact phone: +371 28818088, +371 29149923
E-mail: info@centrometal.lv
Homepage: www.centrometal.lv