A heat pump can be defined as a comprehensive solution for heating, cooling and domestic hot water heating. The indoor unit of the split heat pump is an integrated “all-in-one” system that is able to heat or cool the space and prepare hot water for consumption. One of the great advantages of the Tower-S 200 is the minimal space it takes up, because with floor plan dimensions of 600x600mm it takes up the same space as a washing machine next to which it is usually installed in apartments. It can replace any type of boiler or work in combination with it, in an integrated hybrid system. During installation, it is only necessary to connect the heating supply/return pipes, hot/cold water/recirculation and freon part to the outdoor unit to the Tower. A very practical and effective solution for apartments and houses!

PRODUCT CHARACTERISTICS

Indoor unit of split heat pump Tower-S/200

HEATING TECHNIQUE

• Accumulation tank

• One direct heating circuit

• One mixing heating circuit (additional option)

• DHW tank – 200 l

• Expansion vessel – 11 liters

• Safety valve

• Electric heater – 2 kW (additional

option)

Controller with a color touch screen

COMPREHENSIVE SOLUTION FOR HEATING AND COOLING • Controller with a color touch screen controls with heat pump, up to two mixed heating/cooling circuits, one direct heating/cooling circuit and DHW heating (with recirculation) • It can be connected to underfloor heating/cooling, fan coils and/or low-temperature radiator heating • It is possible subsequent connection to the web porta

CROSS-SECTION:

TECHNICAL MANUAL:

Technical instructions - Tower

Contact phone: +371 28818088, +371 29149923 E-mail: info@centrometal.lv Homepage: www.centrometal.lv

• Air-water heat pumps

• Split models 6-16 kW

• Compact dimensions

• Ecological working medium – R32

• Expansion vessel – 8 liters

• Electric heater – 3/9 kW

• Controller with touchscreen

TECHNICAL DATA:

6kW

Specifications - SPLIT:

10kW

16kW P3

Power supply

V/ph/Hz

220-240/1/50

380-415/3/50

Capacity

Rated input

COP

Capacity

Rated input

COP

Capacity

Rated input

EER

Capacity

Rated input

EER

Seasonal space heating

SCOP 2

ηs

SEER 2

Energy efficiency class 2

seasonal space heating efficiency

Maximum overcurrent protection (MOP)

Minimum circuit ampacity (MCA)

Sound power level

Compressor

Outdoor fan

Net dimension (WxHxD)

Packed dimension (WxHxD)

Net/Gross weight

Operating temperature range

Refrigerant

Piping connections

Installation height difference

Heating A7/W35

Heating A7/W55

Cooling A35/W18

Cooling A35/W7

Main flow 35°C

Main flow 55°C

Main flow 35°C

Main flow 55°C

Main flow 35°C

Main flow 55°C

Main flow 7°C

Type

Air flow

Cooling

Heating

DHW

Type

Factory charge

Type

Liquid phase

Gas phase

Min. pipe lenght

Max. pipe lenght

Outdoor unit above

Outdoor unit below

dB(A)

m³/h

°C

6.20

1.24

5.00

6.00

2.00

3.00

6.55

1.34

4.90

7.00

2.33

3.00

4.95

3.52

195.0

137.9

5.34

Twin rotary DC inverter

2770

1008x712x426

1065x800x485

1.50

Ø 6.35

10.00

2.00

5.00

9.50

3.06

3.10

10.00

2.08

4.80

8.20

2.48

3.30

A+++

A++

5.20

3.47

204.8

136,9

5.98

4030

1118x865x523

1180x890x560

77/88

-5 to 43

-25 to 35

-25 dto 43

R32

1.65

Ø 9.52

Flare

Ø 15.9

16.00

3.56

4.50

16.00

5.52

2.90

14.90

4.38

3.40

14.00

5.71

2.45

4.62

3.41

182

133

4.67

4650

1118x865x523

1180x890x560

1.84

Ø 9.52

6kW

10kW

16kW

Specifications - indoor unit:¹

1. EU standards: EN14511; EN14825; EN50564; EN12102; (EU) No 811:2013; (EU) No 813:2013; OJ 2014/C 207/02:2014. 2. In the average climatic conditions. 3. Maximum domes°C is only available with DHW heater support.

SHPAI60RP24CM-EHT170 + SHPAI100RP24CM-EHT170 + SHPAI160RP24CM-EHT170

Model

SHPA06RP24CM

SHPA016RP24P3CM

SHPA010RP24CM

Power supply

Compatible outdoor unit model

Dimensions (WxHxD)

Net/Gross weight

Sound power leve

Water circuit

Water flow range

DHW

Refrigerant circuit

Backup electric heater

Room temperature range

Main flow temperature range

Piping connections

Safety valve

Internal water volume

Drainage

Expansion vessel

Water side heat exchanger

DHW tank volume

Exp. vessels for DHW

Connections

Safety valve

Liquid phase

Gas phase

Standard

Capacity steps

Cooling

Heating

DHW³

V/Ph/Hz

dB(A)

bar

m³/h

bar

°C

SHPA06RP24CM

220-240/1/50

0.4~1.25

ø 6.35

SHPAO10RP24CM

220-240/1/50

600x1950x600

230/240

3.0

ø25

Plate

3/4"

8.0

170

0.4~2.10

ø 9.52

ø 15.9

30 to 60

5 to 35

25 to 65

5 to 25

SHPAO16RP24P3CM

380-415/3/50

0.7~3.00

ø 9.52

Contact phone: +371 28818088, +371 29149923 E-mail: info@centrometal.lv

HEATING TECHNIQUE

Indoor unit of split heat pump Tower-S/200

Contact phone: +371 28818088, +371 29149923 E-mail: info@centrometal.lv Homepage: www.centrometal.lv

A heat pump can be defined as a comprehensive solution for heating, cooling and domestic hot water heating. The in- door unit of the split heat pump is an integrated “all-in-one” system that is able to heat or cool the space and prepare hot water for consumption. One of the great advantages of the Tower-S 200 is the mini- mal space it takes up, because with floor plan dimensions of 600x600mm it takes up the same space as a washing ma- chine next to which it is usually installed in apartments. It can replace any type of boiler or work in combination with it, in an integrated hybrid system. During installation, it is only necessary to connect the heating supply/return pipes, hot/cold water/recirculation and freon part to the outdoor unit to the Tower. A very practical and effective solution for apartments and houses!

PRODUCT CHARACTERISTICS

• Accumulation tank • One direct heating circuit • One mixing heating circuit (additional option)