Heat power (min-max)
kg/h
%
Ø(mm)
Max pellet consumption
Effectiveness
*Diameter of exhaust gas outlet
Amount of pellets in a bunker
The amount of water in the boiler
Continuous operation with max.load
kg
4.29-14.4
Electricity consumption
Dimensions**(P*D*A)
Dimensions for boilerroom plannin
Weight
5.21-17.51
litri
h
w
mm
m
kg
1.02-3.37
87.87-89.11
80
30
31
29.5-9.0
140-350
562*700*1081
2,26
180
1.2-3.88
88.82-92.13
80
65
50
54-16.5
100-300
610*785*1240
2,40
250
kW
5.21-21.51
1.2-4.85
88.82-90.39
80
65
50
54-13.5
100-300
610*785*1240
2,40
250
6.34-29.14
1.43-6.48
90.65-91.64
100
85
60
59-13
100-400
670*870*1360
2,54
305
CentroPelet ZVB
ZVB 32
ZVB 24
ZVB 20
ZVB 16
2
**(Width * Depth * Height)
*The internal diameter and height of the chimney must be strictly in line with
the boiler's nominal capacity. It must comply with all national regulatory docu-
ments and manufacturer's recommendations.
Contact phone: +371 28818088, +371 29149923
E-mail: info@centrometal.lv
Homepage: www.centrometal.lv
HEATING TECHNIQUE
Compact hot water boilers CentroPelet ZVB are wood pellet firing boilers. They are de-
signed for hot water heating of the smallest up to medium sized facilities. They are made
out of steel with modern design and high efficiency.
The boiler has a built-in burner for combustion of wood pellets with the auto ignition and
digital boiler regulation control which operates flue vent corresponding to flue and boiler
water temperatures.They are supplied with a built-in circulation pump, safety valve, vent
valve, pressure switch and expansion vessel. The pellet tank is an integral part of the
boiler.
SUITABLE FOR THE ENVIRONMENT
Low emission of harmful compounds in the flue gases.EFFICIENT
High boiler efficiency and low maintenance requirements.PELLETS SUPPLY
The pellets are individually supplied over sling transporter and burned by electric heater.PRODUCT CHARACTERISTICS:
EQUIPPED
Factory-fitted circulation pump, safety valve, pressure switch, expansion vessel and automatic vent.
•
Hot water boiler for central heating systems CentroPelet ZVB with the built-in pellet
burner. output 14-29 kW.
•
Hot water boiler CentroPelet is supplied with wood pellets using a screw conveyor,
and the pellets are fired by an electric heater. The stove can be turned on/off
automatically.
•
High efficiency boiler.
•
Low emissions of harmful compounds in flue gases.
•
The possibility of adjusting the switching time.
•
The compact design allows accommodation of the boiler in small boiler rooms
•
Built-in circulation pump, safety valve, pressure switch, expansion vessel and auto-
matic vent valve.
•
Built-in pellet tank.
BASIC DIMENSIONS:
ADDITIONAL EQUIPMENT:
•
Refilling pellets from the larger tank CPSP-ZVB by
screw conveyor.
DELIVERY AND OBLIGATORY ADDITIONAL EQUIPMENT:
TECHNICAL INSTRUCTIONS / BROCHURES:
VB 15-16-20-24-32 -
Technical instructions (PDF)
2
Regulation
Mechanism for flue passage cleaning
Pellet storage
5
4
3
Boiler water inlet
Boiler water outlet
Flue gas exhaust connection
Fresh air supply connection
6
7
1
Delivery:
Indoor furnace with con-
trol, in cardboard
packaging
Flue gas exhaust:
One furnace per one
chimney
Flue gas exhaust:
By outer flue pipes which have to
be connected according to local
regulations
Additional equipment:
a set of flue pipes for CentroPelet ZVB
for a „facade“ connection (flue pipe 1m,
flue pipe 0,5m, T-part cover , T-part, sili-
cone rosette, 90⁰ elbow, flue pipe
0,25m, 45⁰ elbow.
Pellet boiler CentroPelet ZVB 16-32kW
Compact hot water boilers CentroPelet ZVB are wood pellet fir-
ing boilers. They are designed for hot water heating of the small-
est up to medium sized facilities. They are made out of steel with
modern design and high efficiency.
The boiler has a built-in burner for combustion of wood pellets
with the auto ignition and digital boiler regulation control which op-
erates flue vent corresponding to flue and boiler water tempera-
tures.They are supplied with a built-in circulation pump, safety
valve, vent valve, pressure switch and expansion vessel. The pel-
let tank is an integral part of the boiler.
SUITABLE FOR THE ENVIRONMENT
Low emission of harmful compounds in the flue
gases.
EFFICIENT
High boiler efficiency and low maintenance
requirements.
PELLETS SUPPLY
The pellets are individually supplied over sling
transporter and burned by electric heater.
PRODUCT CHARACTERISTICS
EQUIPPED
Factory-fitted circulation pump, safety valve, pressure
switch, expansion vessel and automatic vent.
•
Hot water boiler for central heating systems CentroPelet ZVB
with the built-in pellet burner. output 14-29 kW.
•
Hot water boiler CentroPelet is supplied with wood pellets
using a screw conveyor, and the pellets are fired by an electric
heater. The stove can be turned on/off automatically.
•
High efficiency boiler.
•
Low emissions of harmful compounds in flue gases.
•
The possibility of adjusting the switching time.
•
The compact design allows accommodation of the boiler in
small boiler rooms
•
Built-in circulation pump, safety valve, pressure switch, expan-
sion vessel and automatic vent valve.
•
Built-in pellet tank.
BASIC DIMENSIONS:
ADDITIONAL EQUIPMENT:
•
Refilling pellets from the
larger tank CPSP-ZVB by
screw conveyor.
DELIVERY AND OBLIGATORY ADDITIONAL
EQUIPMENT:
TECHNICAL INSTRUCTIONS / BROCHURES:
VB 15-16-20-24-32 -
Technical instructions
(PDF)
2
Regulation
Mechanism for flue passage cleaning
Pellet storage
5
4
3
Boiler water inlet
Boiler water outlet
Flue gas exhaust connection
Fresh air supply connection
6
7
1
Delivery:
Indoor furnace with control, in cardboard
packaging
Flue gas exhaust:
One furnace per one chimney
Flue gas exhaust:
By outer flue pipes which have to
be connected according to local
regulations
Additional equipment:
a set of flue pipes for
CentroPelet ZVB for a „fa-
cade“ connection (flue pipe
1m, flue pipe 0,5m, T-part
cover , T-part, silicone rosette,
90⁰ elbow, flue pipe 0,25m,
45⁰ elbow.
Contact phone: +371 28818088, +371 29149923
E-mail: info@centrometal.lv
HEATING TECHNIQUE
Pellet boiler CentroPelet
ZVB 16-32kW
Contact phone: +371 28818088, +371 29149923
E-mail: info@centrometal.lv
Homepage: www.centrometal.lv
*The internal diameter and height of the chimney must be strictly in
line with the boiler's nominal capacity. It must comply with all
national regulatory documents and manufacturer's
recommendations.