CENTROMETAL EKO CK-P

Solid fuel boilers

14-110kW

Technical specifications
EKO CK P is steel, water heating boilers (with a nominal heat output of 14 - 110 kW), are fueled with solid fuels, pellets, liquid fuels or gas. This advantage allows the customer to choose the most suitable fuels to use as a base or an additional source of heat. This product is easily recognized by its modern design, which combines the latest technology with high quality materials. These boilers are easy to install, easy to operate and control. Its carefully tested technological solutions make these boilers reliable. An important feature of this boiler is its easy adaptation to any suitable burner and heating system. Made in accordance with European standards EN 304 and EN303-5. It is advisable to connect to the central heating system using a 3-way thermostat and a storage tank. EKO CK P boiler characteristics: Central heating water boilers, fuels with solid fuels, granules, liquid fuels or gas (nominal heat output 14 - 110 kW) A special sized combustion chamber with a three-thread flue gas stream ensures the operation of the boiler with high efficiency. This makes these boilers very economical. The combustion chamber is made up of high-quality 5 mm thick boiler steel plates. Large doors to the combustion chamber allow the chamber to be loaded with large logs, as well as facilitates its cleaning and maintenance.
B
C D
F G
A
230 E 7
Boiler flow;
Thermometer;
Opening for drag regulator;
Upper boiler door;
Lower boiler doors;
Liquid / gas burner connection;
Primary air opening position;
Pump thermostat connection point;
Openings for safety valves;
Flue gas outlet;
Open the flue tanks for cleaning;
Boiler reverse;
Inlet / leak
EKO CK-P apraksts
14
Rated thermal power Water capacity in the boiler Weight of the boiler Outboard diameter of flue gas outlet Burner aperture size Upper Door Open (H * W) Lower door opening (H * W) Chimney draft Installation/outputdiameter Discharge diameter Flue gas temperature (liquid, gas) Flue gas temperature (firewood) Maximum operating temperature Maximum working pressure Boiler depth A Boiler height B Body width C Total boiler width D Boiler base depth E Height to reverse F Height to G Firewood dimensions for loading
kW lit. kg f (mm) f (mm) mm mm Pa R R °C °C °C bar mm mm mm mm mm mm mm mm
14 59 220 150/930 105 321*273 321*322 15 5/4” 1/2” 170 190 90 2,5 985 1255 420 470 565 485 930 500
20
14-20 60 227 150/930 105 321*273 321*322 16 5/4” 1/2” 170 190 90 2,5 985 1255 420 470 565 485 930 500
25
20-25 64 234 150/930 105 321*273 321*322 18 5/4” 1/2” 170 190 90 2,5 1020 1255 420 470 600 485 930 500
30
25-35 67 255 160/930 105 321*273 371*322 19 5/4” 1/2” 170 190 90 2,5 1020 1255 470 520 600 485 930 500
35
30-35 76 266 160/930 105 421*273 421*322 20 5/4” 1/2” 170 190 90 2,5 1020 1255 520 570 600 485 930 500
40
35-40 78 293 180/930 105 421*273 471*322 21 5/4” 1/2” 170 190 90 2,5 1020 1255 570 620 600 485 930 500
50
40-50 96 337 180/1025 105 421*273 471*322 23 5/4” 1/2” 180 220 90 2,5 1142 1255 570 620 690 485 1025 600
60
50-60 118 355 180/1025 105 421*273 471*322 25 5/4” 1/2” 180 220 90 2,5 1142 1355 570 620 725 485 1085 600
70
50-70 135 429 200/1085 105 421*275 471*322 26 64” 1” 190 230 90 2,5 1250 1430 570 640 815 630 1085 700
90
70-90 140 455 200/1085 105 521*275 521*422 29 2” 1” 200 240 90 2,5 1250 1430 620 690 815 630 1085 800
110
90-110 157 492 200/1085 105 521*275 521*422 31 2” 1” 200 240 90 2,5 1250 1430 620 690 915 630 1085 800
HEATING TECHNIQUE
Contact phone: +371 28818088, +371 29149923 E-mail: info@centrometal.lv Homepage: www.centrometal.lv
*The internal diameter and height of the chimney must be strictly in line with the boiler's nominal capacity. It must comply with all national regulatory documents and manufacturer's recommendations.